Greater Noida Institute of Technology (Engineering Institute)

(Approved by AICTE & Affiliated to AKTU, Lucknow)

Civil Engineering - Faculty Achievements

Overview Vision & Mission PEO-PO-PSO HOD’s Message Faculty Achievements Students Achievement Students Clubs Labs Department Advisory Committee(DAC) COs ACTIVITIES

Journal Paper

  • Sushant Kumar, Anuj Kumar Sharma (2024) “Wind Analysis of High Rise Building Using Etabs” Educational Administration: Theory and Practice, 30(5), 11525-11530.
  • Anuj Sharma & Sushant Kumar (2024) “Experimental Investigation of Bamboo leaf ash and rice husk ash as partial replacement of cement in concrete” Journal of Chemical Health Risk, Vol. 14, No.3.
  • Sanghati Mutsuddi (2024) “A Review on Ground Improvement Technique by Soil Nailing”, J. Educational Administration: Theory and Practice.
  • Sanghati Mutsuddi (2024) “Stabilization of Peat soil Using Portland Cement, Rice husk and Egg Shell”, J. Journal of Chemical Health Risk.
  • Sanghati Mutsuddi (2024) “Stabilization of Peat soil Using Portland Cement, Rice husk and Egg Shell”. J. Educational Administration: Theory and Practice.
  • Taranpreet Kaur, Saurav Yadav (2024) “A Review on Partial Substitution of Fine Aggregate with Copper Slag and Basalt” J. Educational Administration: Theory and Practice.
  • Taranpreet Kaur (2024) “Exploring the Enhancement of Black Cotton Soil properties through MK -III Polymer & Cornstarch: A Comprehensive Review” Journal of Chemical Health Risks, Vol. 14 No. 3.
  • Taranpreet Kaur (2024) “Synergistic Soil Stabilization: Exploring the combined efficacy of MK-III & Cornstarch” J. Educational Administration: Theory and Practice.
  • Dhruv Anand & Shiv Kumar (2023) “Manufacturing of fly ash bricks by utilizing paint industry waste”, Journal of Research Administration, ISSN: 1539-1590 (Scopus).
  • Ankit Kumar Sharma & Taranpreet Kaur “An analytical study of hybrid fibre reinforced concrete” J. China Petroleum Processing and Petrochemical Technology, Volume 23, Issue 2, ISSN 1008-6234. (Scopus).
  • Anit Kumar & Sushant Kumar (2023) “PARTIAL REPLACEMENT OF CEMENT WITH FLY ASH TO IMPROVE CONCRETE PROPERTIES” J. China Petroleum Processing and Petrochemical Technology, Volume 23, Issue 2, ISSN 1008-6234. (Scopus).
  • Ankit Kumar Sharma & Anuj Kumar Sharma (2023) “PARTIAL REPLACEMENT OF CEMENT WITH FLY ASH TO IMPROVE CONCRETE PROPERTIES” J. China Petroleum Processing and Petrochemical Technology, Volume 23, Issue 2, ISSN 1008-6234. (Scopus).
  • Sushant Kumar, Anil Kumar Sahu, Munendra Kumar (2023) “Temperature analysis modelling to detect the seepage flow variation in an earth dam”, Journal of Environmental Protection and Ecology, SciBulcom Ltd., Vol 24, Issue 2, ISSN No. 1311-5065. (SCIE and Scopus).
  • Sushant Kumar, Anil Kumar Sahu, Munendra Kumar (2022) "Modeling the effect of central impervious core and downstream filter geometry on seepage through earth dams", J. Ain Shams Engineering Journal. Vol 13, Issue 1, 101510, 1-16. https://doi.org/10.1016/j.asej.2021.05.024 (SCIE and Scopus).
  • Sushant Kumar, Anil Kumar Sahu, Munendra Kumar (2021) "Heat and water flux in an earth dam" J. Water Science and Technology, 84 (10-11): 2760–2779. https://doi.org/10.2166/ wst.2021.241. (SCIE and Scopus).
  • Sushant Kumar (2021) “ROAD SAFETY PLAN FOR HAIRPIN CURVES”, International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056.
  • Sushant Kumar, Anil Kumar Sahu, Mahendra Choudhary, Tejram Nayak (2018) "Sustainable development of groundwater: A case study of Begamganj block in Bina River Basin of Madhya Pradesh, India", International Journal of Recent Research Aspects Vol. 5, Issue 1, ISSN: 2349-7688.
  • Sushant Kumar, Mahendra Choudhary, Tejram Nayak (2017) "Groundwater Modelling in Bina River Basin, India using Visual MODFLOW", International Journal for Scientific Research & Development. Vol. 5, Issue 05, 2017, ISSN (online): 2321-0613.
  • Sushant Kumar (2017), Empirical Observation based Seepage Analysis of Madhya Ganga Canal, Vol. 5, Issue 05, 2017, ISSN (online): 2321-0613.
  • Anuj Sharma (2021) “PM2.5 and PM10: Existence, Treatment and Problems”, Journal of Emerging Technologies and Innovative Research, ISSN: 2349-5162.
  • Anuj Sharma (2021) “Comparison of Concrete made through TSMA using Metakaolin and GGBS vs Normal Concrete made through NMA”, International Research Journal of Engineering and Technology (IRJET).
  • Anuj Sharma (2021) “Dynamic Analysis of G+15 Multi-storied RCC Commercial Buildings with Different Plan Configuration in Seismic Zone V using ETABS 2018”, International Research Journal of Engineering and Technology (IRJET).
  • Taranpreet (2021) International Journal of Innovative Science and Research Technology.
  • Anuj Sharma (2020) “Study On Plastic Waste For Replacement Of Coarse Aggregate With Soft And Hard Plastic In Concrete”, Aegaeum Journal (UGC-Care), Vol.8, Issue 3, March 2020.
  • Anuj Sharma (2020) “Study On Execution Of Fly Ash Bricks Using Waste Material”, Aegaeum Journal (UGC-Care), Vol.8, Issue 3, March 2020.
  • Anuj Sharma (2020) “A Study on the Behavior of Recycled Aggregate in SCC”, International Journal of Research in Engineering, Science and Management Volume-3, Issue-4, April-2020 ISSN (Online): 2581- 5792.
  • Anuj Sharma (2020) “Sustainability in Architecture: Dynamic Buildings, “The Future of India””, IRJET, e-ISSN: 2395-0056, Volume: 07 Issue: 01 | Jan 2020.
  • Anuj Sharma (2020) “DESIGN A G +10 EARTHQUAKE RESISTANCE BUILDING IN STADD PRO”, AEGAEUM JOURNAL, ISSN NO: 0776-3808.
  • Anuj Sharma (2020) “Altering the Geotechnical Properties of Clayey Soil by using Scrap Rubber”, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181 Vol. 9 Issue 07, July-2020.
  • Anuj Sharma (2020) “A Comparative Study on Cost Analysis of RCC and Composite Structures in India”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056 Volume: 07 Issue: 06 | June 2020, p-ISSN: 2395-0072.
  • Anuj Sharma (2020) “Characterization of lightweight concrete”, AEGAEUM JOURNAL, ISSN NO: 0776-3808.
  • Anuj Sharma (2020) “CONSTRUCTION OF HIGHWAY USING INDUSTRIAL WASTE”, International Journal of Engineering Research & Technology (IJERT), e-ISSN: 2395-0056 Volume: 07 Issue: 07 | July 2020 p-ISSN: 2395-0072.
  • Anuj Sharma (2020) “Effects of Air Pollutants on Surface Water Contamination”, AEGAEUM JOURNAL, ISSN NO: 0776-3808.
  • Anuj Sharma (2020) “Comparative Study On The Seismic Behaviour Of RCC And Composite Structures” In IOSRD (International Organization Of Scientific Research And Development), Paper Id-2159.
  • Anuj Sharma (2020) “A Review on Comparative Study On The Seismic Behaviour Of RCC And Composite Structures” In IRJET (International Research Journal Of Engineering And Technology), e-ISSN: 2395-0056 | p-ISSN: 2395-0072.
  • Arvind Kumar (2022) “Enhancement in properties of concrete by Silica fumes” International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056.
  • Shreeja Kacker (2022) “Response study of multi-storied reinforced concrete building with fluid”, International Research Journal of Engineering and Technology- IRJET.
  • Shreeja Kacker (2022) “Study of Bond Ash Properties of Concrete utilizing Fly Ash, Marble and Granite Powder”, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET). e-ISSN: 2319-8753; p-ISSN: 2320-6710.
  • Shreeja Kacker (2022) “Design of Road & Transportation System in Surjkund Area (Faridabad)”, International Journal of All Research Education & Scientific Methods, ISSN: 2455-6211.
  • Shreeja Kacker (2022) “Optimum Replacement of Coarse Aggregate by Steel Slag and Fine Aggregate by Waste Glass Powder” International Research Journal of Engineering & Technology (IRJET), e-ISSN: 2395-0056; p-ISSN: 2395-0072.
  • Anuj Sharma (2022) “Effect of Steel Fibre and Marble Dust on the Mechanical Properties of High Strength Concrete (HSC)”, International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056.
  • Anuj Sharma (2022) “A Comparative Study on the Seismic and Cost Analysis of RCC and Composite Structure in India”, International Journal of All Research Education & Scientific Methods.
  • Anuj Sharma (2022) “Design & Development of Maglev Girder Bridge & Vehicle”, International Journal of Innovative Research in Engineering.
  • Arvind Kumar (2021) “Soil Stabilization Using Plastic Chips, Granules & Sugarcane Bagasse Ash Mixture”, International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653.
  • Taranpreet Kaur & Pradeep Singh (2020) "Impact of SoilTech MK III Polymer on Problematic Soil: A Review Study", International Journal for Research in Applied Science & Engineering Technology (IJRASET). ISSN: 2321-9653, Volume 8 Issue VIII Aug 2020.
  • Taranpreet Kaur (2021) “Using Waste Polymer for Soil Stabilization”, International Journal of Innovative Science and Research Technology.
  • Saurav Yadav (2022) “A Study on Plastic Waste for Replacement of Coarse Aggregate with Soft and Hard Plastic in Concrete”, International Journal of Innovative Science and Research Technology, ISSN: 2456-2165.

Conference Paper

  • Sushant Kumar, Anil Kumar Sahu, Mahendra Choudhary, Tej Ram Nayak. (2018) "Sustainable development of groundwater: A case study of Begamganj block in Bina River Basin of Madhya Pradesh, India", International Conference, 3rd Go Green Summit, held at Manila, Philippines., Vol. 1, Issue X, 2018, ISBN:978-81-932966-1-5.
  • Sushant Kumar, Anil Kumar Sahu, Munendra Kumar (2020) "Effect on seepage through an earth dam on its water quality: A review", ASCE India 2nd International conference, CRSIDE 2020. held at Kolkata, India, Volume 1, 2020, ISBN: 978-93-5396-500-6.
  • Sushant Kumar (2016) "Canal Lining of Madhya Ganga Canal, National Conference on Water resource and Flood management-2016 organised by Indian Society for Hydraulics, held at SVNIT Surat, India. Bijnor, Uttar Pradesh, India", ISBN: 978-81-931162-4-1.
  • Sushant Kumar, Prashant Sharma (2022) “Environmental effects of cement production: A review”, Future Learning Aspects of Mechanical Engineering (FLAME 2022), Proceeding of Springer conference.
  • Sushant Kumar, Anil Kumar Sahu, Munendra Kumar (2021) "Simulation of solute mass flux in an earth dam", International Conference on “Advances in engineering science and technology-2021” held at Dehradun, India, ISBN: 97-89-35-47-35-34-9.
  • Taranpreet Kaur (2020) "Performance of SoilTech MK III Polymer and Fly Ash on Problematic Soil", Advances in Materials Processing and Manufacturing Applications, Lecture Notes in Mechanical Engineering, ISBN 978-981-16-0908-4, https://doi.org/10.1007/978-981-16-0909-1_51.
  • Shreeja Kacker (2019) ‘Design of an Energy Efficient Airport using TEG on Runways’ in International Conference on Smart Cities: Opportunities and Challenges, ICSC 2019 at Jamia Millia Islamia, New Delhi, May 2019.
  • Shreeja Kacker (2018) ‘Experimental Study of Change in Plasticity of Black Soil with addition of Bottom Ash’ in International Research Journal of Engineering and Technology, ISSN 2395-0056, Volume-5, Issue-7.
  • Shreeja Kacker (2018) ‘Phase2 Analysis & Design of Cut & Cover Metro Tunnels in Cities’ in International Journal of Research in Engineering, IT and Social Sciences, ISSN 2250-0588, Volume-8, Issue-4, April 2018.
  • Shreeja Kacker (2017) ‘Challenges in Design of Shallow Tunnel in Urban Areas’ in International Conference (Tunneling Asia 2017, Mumbai, India).
  • Shreeja Kacker (2016) ‘Foundation Structure Analysis for Concrete Gravity Dam using Finite Element Method’ in International Conference (TRACE 2016), Noida, India.
  • Shreeja Kacker (2016) ‘Analysis of Large Caverns in Power House Complex’ in International Conference (TRACE 2016), Noida, India.
  • Shreeja Kacker (2014) 'Comparative Study of the Shear Resistance of Different Types of Shear Connectors in Steel Beam-Concrete Slab Composite Construction’ with International Journal of Engineering Research & Technology, Vol. 3 Issue 12, December-2014.
  • Shreeja Kacker (2022) 'Enhancement of Air Quality Index of Delhi during lockdown period amidst Covid-19' in the Proceedings of 4th National Level IEEE Conference 'Technovation 2021' in January 2022.
  • Rajesh Kumar Sharma and Saurav Yadav (2021) “Influence of Incorporating Industrial Byproducts/Wastes on Mechanical Properties and Durability Characteristics of Self-Consolidating Concrete: A Review”, International conference on Recent Trends in Industrial and Production Engineering, Springer, ISBN: 978-981-16-3330-0, https://link.springer.com/chapter/10.1007%2F978-981-16-3330-0_16.

Patent

  • Saurav Yadav, Taranpreet Kaur, Manjeeta Priyadarshi, Monika Angral, Manisha Sharma, Sandeep Chauhan, Ajay Singh “Analyzing method for advancement of geotechnical properties of soil with medical ash and fly ash” (application number: 202311064579), publication date: 26th September 2023
  • Taranpreet Kaur, Saurav Yadav, Manjeeta Priyadarshi, Deepti Dohare, Sandeep Chauhan, Shradha Gupta, Ashutosh Kumar, Rajesh Kumar Sharma, Aareez Naseem “Effect of replacement of fine aggregate to recycled fine aggregate and copper slag in luminous concrete” (Application Number: 202311056624), Publication Date: 23rd August 2023
  • Anuj Kumar Sharma, Hemant Kumar Gupta, Sanjeev Singh, Yasir Karim, Vineeta Pal, Vijay Lokesh Singh, Patent submitted in Intellectual Property India with title “A CITY RESPIRATOR WITH TWO LEVELS OF PURIFICATION” (Application Number: 202211004346 A), Publication Date: 2th April 2022.

Book Published

  • Anuj Kumar Sharma (2023), Digital Education the New Normal, SAAR Publication, ISBN No. 978-81-958117-7-9

Book Chapter Published

  • Sushant Kumar (2023) “Environmental effects of cement production: A review” Recent Advances in Mechanical Engineering, Proceedings of FLAME 2022, Springer Nature, Singapore.
  • Taranpreet Kaur (2020) “Performance of SoilTech MK III Polymer and Fly Ash on Problematic Soil”, Advances in Materials Processing and Manufacturing Applications, Proceedings of iCADMA 2020", Springer, page 497, ISBN: 978-981-16-0908-4.

Departments

Admission Enquiry