Greater Noida Institute of Technology (Engineering Institute)

(Approved by AICTE & Affiliated to AKTU, Lucknow)

Mechanical Engineering - Faculty Achievement

Overview Vision and Mission PEO-PO-PSO HOD's Message Faculty Achievements Student Achievements Student Clubs Labs Departmental Advisory Committee COs ACTIVITIES

Research Papers:

  1. Vishal Kushwaha, Vivek Tiwari, Sumit Singh, Aman verma, Sandeep Chauhan, “A Literature Review on Fabrication of FDM Based 3D Printer”, International Journal of creative Research Thoughts, ISSN: 2320-2882, Volume 12, Issue 4 April 2024, pp-304-310.
  2. Arman Ashraf, Azaz Ali, Bholu Rajak, Nikhil Singh, Gagan Varshney, “A Literature Review on Characterization of Dissimilar Joints”, International Journal of creative Research Thoughts, ISSN: 2320-2882, Volume 12, Issue 4 April 2024, pp-304-310.
  3. Md Atif Jameel, Aditya Kumar, Shivam Tiwari, Girendra Bhati, “Ceremic Matrix Nanocomposite in Bio-Medical and Dental Applications-An Innovative Review”, 10th International Symposium on Fusion of Science and Technology (ISFT-2024), organized by J.C. Bose University of Science and Technology, YMCA, Faridabad, on January 4-8, 2024.
  4. Girendra Bhati, Vikram Singh, Sanjeev Kumar, “Influences of Compaction Process Parameters on Mechanical Properties in Hybrid-Freeze Casting Process”, 10th International Symposium on Fusion of Science and Technology (ISFT-2024), organized by J.C. Bose University of Science and Technology, YMCA, Faridabad, on January 4-8, 2024.
  5. Bhawesh Raj, Nitin Kumar, Girendra Bhati, Vikram Singh, Sanjeev Kumar, “Regression Analysis of Process Parameters on Tensile Strength in Eps-Assisted-Investment Casting Process”, 10th International Symposium on Fusion of Science and Technology (ISFT-2024), organized by J.C. Bose University of Science and Technology, YMCA, Faridabad, on January 4-8, 2024.
  6. Md Kaif, Ravi Kumar Verma, Manveer, Kaif Ahmad, Trinath Mahala, “A literature review on Performance Analysis of Solar Still using Forced”, International Journal of creative Research Thoughts, ISSN: 2320-2882, Volume 12, Issue 4, April 2024, q307-q312, http://doi.one/10.1729/Journal.39242.
  7. Abhishek Kumar, Shrivastav Atul Kumar, Bablish Kumar, Syed Qaisar Husain, “A Review on experimental analysis on influence of process parameters of GTAW in a butt welded DSS (2205)”, International Conference of Advance Research and Innovation (ICARI-2024), Organised by ijari.org & Institution of Engineers(India).
  8. Dr. Iqbal Ahmed Khan, “Industry 4.0 Implications for Industries-Academia in the Indian Context”, 2nd Indian International Conference on Industrial Engineering and Operations Management, IEOM India, NIT, Warangal, India.
  9. Himanshu Dagur, Sandeep Chauhan, Effect of TIG and activated flux TIG welding processes on weld bead geometry, microstructure, and hardness of SAF 2507 grade super duplex stainless steel joints, IOP Series: Engineering Research Express (ERX), 2631-8695, https://iopscience.iop.org/journal/2631-8695, DOI 10.1088/2631-8695/ace2af.
  10. Ritunjay Rai, Rishabh Sharma, Rahul Rana, Abhinav Madaan, Mr. Sandeep Chauhan, “Influence of Process Parameter of GTA Welding On Metal Deposition Rate and Mechanical Properties of Super Duplex Stainless Steel Using Design of Experiment”, International Journal of Engineering And Science, Volume 13, Issue 5, pp: 91-102, www.researchinventy.com, ISSN (e): 2278-4721, ISSN (p): 2319-6483, http://www.researchinventy.com/papers/v13i5/G13053339.
  11. Ritunjay Rai, Rishabh Sharma, Rahul Rana, Abhinav Madaan, Dr. Rajeev Kumar, “GTA Welding Process and Its Influence on Structure Properties Relationship for Petrochemical Industries”, International Journal of Engineering And Science, ISSN (e): 2278-4721, ISSN (p): 2319-6483, Volume 13, Issue 5, pp: 91-102, www.researchinventy.com, http://www.researchinventy.com/papers/v13i5/N130591102.
  12. Anubhav Raj,Girendra Bhati and Gagan Varshney, “Characterization of Hydroxyapatite Matrix Ceramic Composite manufactured by Uniaxial Pressing”,International Conference on Advanced Materials & Technologies for Industry 4.0 (ICAMT-4.0), organized by Bannari Amman Institute of Technology, Sathy, Erode, Tamilnadu, India on March 23rd-24th, 2023.
  13. Girendra Bhati, Vikram Singh, Sanjeev Kumar, Sudhir Kumar, “Microstructure Analysis and Multi-Objectives Hybrid Optimization of Process Parameters of Hap/Al2O3 Biomaterials produced by Freeze Casting”, 7th International Conference on Production and Industrial Engineering (CPIE-2023), organized by Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar-144027, India, On March 10th -12th, 2023.
  14. Anubhav Raj,Girendra Bhati, Gagan Varshney, “Compaction Parametric Optimization of Zro2/Hap Ceramics Matrix Composites produced by Uniaxial Compression”, 7th International Conference on Production and Industrial Engineering (CPIE-2023), organized by Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar-144027, India, On March 10th -12th, 2023.
  15. Devesh Mishra, Abhishek Manohar, Mohit Pal, Kritagya Chaudhary, Nikita Nath, Nitin Kumar, Girendra Bhati, Iqbal Ahmed Khan, Syed Qaisar Husain, “An Innovative Review on the Oscillating Drum Ball Milling Process”, 7th International Conference on Production and Industrial Engineering (CPIE-2023), organized by Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar-144027, India, On March 10th -12th, 2023.
  16. Iqbal Ahmed Khan, Mohammad Misaque Khan, Sidharth Singh Sengar, Akhlakur Rahman, Ansar Ansari, Mohd.Arif, “Retrofitting is the Revival ofConventional Manufacturing Equipments usingIndustry4.0Technologies: AReview”,7th International Conference on Production and Industrial Engineering (CPIE-2023), organized by Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar-144027, India, On March 10th -12th, 2023.
  17. RupakKumar Deb, Iqbal Ahmed Khan, Sanjay Sundriyal, “A Review of Evaporation Droplets on a Transparent heater”, Materials Today Proceedings, Febraury-2023, https://doi.org/10.1016/j.matpr.2023.02.119. (Scopus).
  18. Girendra Bhati, Vikram Singh, Sanjeev Kumar, Sudhir Kumar “A Review on the Influences of Process Parameters on Mechanical Properties and Microstructure of Freeze Casting Process”, at “International Conference on Robotics and Control Technologies (RIACT 2022)”, to be organized by Vellore Institute of Technology, Chennai, India, in association with Teesside University, UK during 23rd -25th September, 2022.
  19. Md Modassar Anwar, Girendra Bhati, Vaibhav Gangwar, Gagan Varshney “Characterization of Al-6061 Castings Fabricated by Microwave Energy Technique”, at “International Conference on Robotics and Control Technologies (RIACT 2022)”, to be organized by Vellore Institute of Technology, Chennai, India, in association with Teesside University, UK during 23rd -25th September, 2022.
  20. Awadhesh Singh, Girendra Bhati, Gagan Varshney “Influence of sintering process parameters on compressive strength of Al2O3-ZrO2 slip casted ceramic for joint replacement” International Conference on Emerging Trends in Mechanical & Industrial Engineering (ICETMIE-2022), on 04 and 05 March 2022.
  21. Aslam, Md. ShahoodAlam, Arshad Karim, Mohammad Danish, RehanAlam, Girendra Bhati “Multi-Objective Optimization of Process Parameters of HAp-Al2O3 Bio-inspired Freeze Castings by Genetic Algorithm” International Conference on Emerging Trends in Mechanical & Industrial Engineering (ICETMIE-2022) on 04 and 05 March 2022.
  22. Md Modassar Anwar, Girendra Bhati, Vaibhav Gangwar (2022) “Optimization of Process Parameters of Al-6061 Castings Produced by Microwave Energy Technique” International Conference on Advances in Transport Phenomena (ICATP 2022) organized by the School of Advanced Sciences, VIT-AP University, Andhra Pradesh, during July 16-18, 2022.
  23. Gagan Varshney, Syed Qaisar Husain, Avinash Ravi Raja and Girendra Bhati, “An Application of Analytical Hierarchy Process in Selection of Coating Material Composition in Lost Foam Casting Process”, Materials Science and Engineering, Vol.: 1168, (2021), 012021, doi:10.1088/1757-899X/1168/1/012021 (Scopus).
  24. Syed Qaisar Husain, Divyansu Sharma, Vikash Singh, Gagan Varshney, Girendra Bhati, Sudesh Singh, Avinash Ravi Raja “Application of thermal spraying process in advancement of welding Technology”, Materials Science and Engineering 1168 (2021) 012021, doi:10.1088/1757-899X/1168/1/012021(Scopus).
  25. Avinash Ravi Raja, Anuj Dixit, Ayush Jain, Syed Qaisar Husain, Gagan Varshney and Sudesh Singh,Estimation of temperature during TIG welding of titanium, “Materials Science and Engineering 1168 (2021) 012021, doi:10.1088/1757-899X/1168/1/012021(Scopus).
  26. Sandeep Chauhan, Chandan Kumar, Ashish Gupta and Vikas Rastogi, “Effect of asymmetries of stiffness and mass on parametric instabilities of hollow rotor system”, Journal of Engineering Research, special issue ICCEMME Conference, 2021. DOI: https://doi.org/10.36909/jer.ICCEMME (Scopus)
  27. Ashish Gupta, Viswajeet Singh Yadav, Sandeep Chauhan, “Investigation of dynamic behavior of Hollow Rotor Shaft System through FEM”, Journal of Physics: Conference Series, Volume 2007, (2021) 012066. doi:10.1088/1742-6596/2007/1/012066 (Scopus)
  28. Aditva Mishra, Nagendra kr Maurya, Manish Maurya, S P Dwivedi, Ashish Srivastava, AmbujSaxena,,Sandeep Chauhan, Aditya Tiwari, “Investigation of effect of process variable on dimensional accuracy of FDM component using response surface methodology”, World Journal of Engineering, Vol. 18 No. 5, Pg. 710-719. https://doi.org/10.1108/WJE-08-2020-0347 (2021). (Scopus and UGC)
  29. Vishal Shankar Srivastava, Tarun Kumar Gupta, Ashish Kumar Srivastava, Sandeep Chauhan, Pankaj Kumar Chauhan, “Effects of cutting parameters on aluminium alloys- A review”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.03.091. (Scopus)
  30. Girendra Bhati, Sudhir Kumar, Vikram Singh, Ajay Kumar “ Effect of Sintering Process Parameters on the Hardness of Ceramic Shell, Fabricated by EPS-Assisted Investment Casting Process”, at International Conference on Cutting Edges in Mechanical Engineering (ICCEME-21), held at Greater Noida Institute of Technology, Greater Noida- 201307 on 20th February,
  31. Girendra Bhati, Vikram Singh, Sudhir Kumar “Effect of Sintering Process Parameters on Compressive Strength of Ceramic Freeze Castings” at International Conference on Trends & Advances in Mechanical Engineering (ICTAME-2021), held at JC Bose University of Science and Technology, YMCA, Faridabad, held on 18th-19th March,
  32. Girendra Bhati, Sudhir Kumar, Ajay Kumar, Sanjeev Kumar “Optimization of process parameters of A-359 aluminium alloy in EPS-Assisted-Investment Casting Process using Taguchi method”, Published in Materials Science and Engineering, Vol. 804 (2020) 012020, doi:10.1088/1757-899X/804/1/012020 (Scopus).
  33. Sandeep Chauhan, Ashish Gupta, Chandan Kumar, “A study on buckling of piezoelectric circular cylindrical shell”, IOP Conf. Series: Materials Science and Engineering 691 (2019) 012018 (Scopus).Vaibhav Gangwar, Hari Singh, Sudhir Kumar, Girendra Bhati “Effect of Process Parameters on Tensile Strength of AA-6063 In-situ Microwave Casting by using Taguchi method”, at National Conference on Emerging Trends in science and Technology (ETEST-2K19) held at Moradabad Institute of Technology, Moradabad on 5th -6th September 2019.
  34. Girendra Bhati, Sudhir Kumar, Ajay Kumar, Vaibhav Gangwar “ Effect of Process Parameters on Tensile Strength of A-359 in EPS-Assisted-Investment Casting Process using Taguchi Method”, at National Conference on Emerging Trends in science and Technology (ETEST-2K19) held at Moradabad Institute of Technology, Moradabad on 5th -6th September 2019.
  35. Sandeep Chauhan, Azad Ahmad, “Buckling of Circular Cylinder under Axial Load”, International Journal of Engineering & Technology, 7 (4.39) (2018) 404-406. (Scopus)
  36. Nagendra Kumar Maurya, Manish Maurya, Ashish Kumar Srivastava, Shashi Prakash Dwivedi Abdheshkumar , Sandeep Chauhan, “Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique”, Materials Today: Proceedings (2020) Volume 25, 755-758 (Scopus)
  37. GirendraBhati, SudhirKumar,Vaibhav Gangwar “Expandable Polystyrene Assisted Investment Casting Process – A Review”, at International Conference on Technology and Trust (ICTT-17) held at Greater Noida Institute of Technology, Greater Noida- 201307 on 28th -29th December 2017.
  38. Vaibhav Gangwar,SudhirKumar,GirendraBhati“Optimization of Parameters of Friction Stir Welding of Al-6061”, at International Conference on Technology and Trust (ICTT-17) held at Greater Noida Institute of Technology, Greater Noida- 201307 on 28th -29th December 2017.
  39. GirendraBhati,SudhirKumar,AjayKumar, Vaibhav Gangwar “Effect of Density and Viscosity of Slurry in ExpandablePolystyreneAssistedInvestmentCastingProcess”, at International Conference on Technology and Trust (ICTT-17) held at Greater Noida Institute of Technology, Greater Noida- 201307 on 28th -29th December 2017.
  40. Leena Bansal, Sandeep Chauhan, Dr. Chandan Kumar, Dr. S. M. Muzakkir, Hasan Zakir Jafri,” CFD Analysis of a 3d Aerofoil using Ansys Fluent”, International Advanced Research Journal in Science, Engineering and Technology CETCME-2017 Vol. 4, Special Issue 3, February 2017
  41. Yogesh Chaubey, Chandan Kumar, Sandeep Chauhan, “Failure Analysis of Suspension Coil Spring for Passenger Car through Sem Microstructure Investigation” ,International Journal of Innovations in Engineering and Technology, Volume 7, Issue 1, June 2016 ISSN (online): 2319-1058
  42. Yogesh Chaubey, Chandan Kumar, Sandeep Chauhan,” Failure Analysis of Suspension System: Case Study-Tata Indica “, IJSRD - International Journal for Scientific Research & Development| Vol. 3, Issue 09, 2015 | ISSN (online): 2321-0613.
  43. Girendra Bhati, Sudhir Kumar, Ajay Kumar “An Application of Analytical Hierarchy Process in Selection of Coating Material Composition in EPS Assisted Investment Casting Process”. “Proc. of the 1st National Conference onEmerging Trends in Engineering and Technology (ETEAT -2013)”, March 16–17, 2013. Vishveshwarya Group of Institution, Dadri- 203207, Gautam Budh Nagar, U.P., India.
  44. Girendra Bhati, Sudhir Kumar and Ajay Kumar “Selection of Refractory coating materials in EPS Assisted Investment Casting with pattern by using Fuzzy Analytical Hierarchy Process” Indian Foundry Journal, Vol. 59, No. 2, February 2013, Page No.: 33-44.
  45. Girendra Bhati, Sudhir Kumar, Ajay Kumar“Optimization of coating materials used on Expandable Polystyrene pattern in Investment casting process”,i-manager’s International Journal- “Journal on Mechanical Engineering”, Vol. 3, No. 2, February - April 2013, Page No. 21-32.
  46. Vivek Singh, Sandeep Chauhan, “Finite Element Analysis of a Spur Gear Tooth using ANSYS and Stress Reduction by Stress Relief Hole”, International Journal of Emerging Trends in Engineering and Development. Issue 2, Vol.6 (September 2012) ISSN 2249-6149.
  47. Vivek Singh, Sandeep Chauhan, “Finite Element Analysis of a Spur Gear Tooth using SolidWorks Simulation and Stress Reduction by Stress Relief Hole”,International Journal of Advanced Scientific and Technical Research. Issue 2, Vol.5 (October 2012) ISSN 2249-9954.
  48. GirendraBhati,SudhirKumar,AjayKumar “DevelopmentofInvestmentCastingProcessbyusingPolystyrenePatternwithVacuum” “ofthe5thInternationalConferenceonAdvancesinMechanicalEngineering(ICAME-2011),June06-08,2011.S.V.NationalInstituteofTechnology,Surat – 395007,Gujarat,India” “PageNo.:1308-1312”.

 

Patents:

  1. Girendra Bhati, Ravi Shankar Pandey, Pramod Kumar, SarimReyaz and Sajjid Hussain, Patent submitted in Intellectual Property India with title “AVALANCHE RESISTANCE STRUCTURE CUM SHELTER FOR TROOPS AND PEOPLE AT HIGH ALTITUDE REGIONS”, (Application Number: 202311005714), Published Date: 3rd February 2023.
  2. Girendra Bhati, Vikram Singh, Sanjeev Kumar and Sudhir Kumar,Patent submitted in Intellectual Property India with title “DESIGN OF COMPOUND FREEZE CASTING PROCESS”, (Application No.:202111067709); Published Date: 7th January, 2022.
  3. Sudhir Kumar, Prateek Gupta, Girendra Bhati,Vaibhav Gangwar, Ajay Kumar and Rakesh Kumar Yadav, Patent submitted in Intellectual Property India with title “DRY ELECTRODE ADVANCED MANUFACTURING METHOD AND PROCESSES FOR LITHIUM-ION BATTERIES”, (Application No.: 202111044197); Published Date: 15th October, 2021.
  4. Sudhir Kumar, Vaibhav Gangwar, Girendra Bhati, Prateek Gupta, Amit Surya and Rohit Sahu, Patent submitted in Intellectual Property India with title “RAIN SENSING UMBRELLA: RAIN SENSING HANDS FREE AUTO OPEN CLOSED UMBRELLA BAG”, (Application No.:202111032910); Published Date: 20th August, 2021.

 

Books:

  1. Vasudha Tiwari, Dr. Sunil Kumar Chaudhary, Dr. Iqbal Ahmed Khan, “ Emerging Technology For Engineering”, Vayu Education of India, Patparganj, ISBN‏ : ‎ 978-9392475009.

 

Book Chapters:

  1. Sandeep Chauhan, Tarun Kumar Gupta and Vishal Shankar Srivastava, “Applicability of Banana Fiber as Reinforcement in Composites”, Smart Innovation, Systems and Technologies Volume 239, Computational and Experimental Methods in Mechanical Engineering Proceedings of ICCEMME 2021 Springer Nature Singapore Pte Ltd.,2021, (ISBN No: 978- 981-16-2857-3).
  2. Aditya Mathur, Chetan Bansal, Sandeep Chauhan, and Omprakash Yadav, “A Review of Pick and Place Operation Using Computer Vision and ROS”, Smart Innovation, Systems and Technologies Volume 239, Computational and Experimental Methods in Mechanical Engineering Proceedings of ICCEMME 2021 Springer Nature Singapore Pte Ltd.,2021, (ISBN No: 978-981-16-2857-3).
  3. Omprakash Yadav, Ankit Chhonkar, Rahul Sharma, Sandeep Chauhan, Ashish Bansal, Navneet Singh Baghel, Himanshu Sharma, and Devesh Sharma, “Experimental Study of Parameter Affecting the Thermal Conductivity of Composite Materials and Alloy: A Review” , Smart Innovation, Systems and Technologies Volume 239, Computational and Experimental Methods in Mechanical Engineering Proceedings of ICCEMME 2021 Springer Nature Singapore Pte Ltd.,2021, (ISBN No: 978-981-16-2857-3).

Departments

Admission Enquiry